"We have used this material Textures in two projects this year. It was the first time we've utilized the Textures line and we love it! Both applications were for custom exterior dimensional signage. From a fabrication standpoint, we laser engraved the material for both projects. There is a possibility that we may end up incorporating this into another upcoming project in which it will likely have to be rotary engraved. So far, the only problem we saw was that it takes a little longer to laser and two passes tend to work better than one."

-Brad Harmon

Syntech of Burlington

"I put the LaserGlow to the test today, it cut or fabricated well with the safety saw and the laser. It engraved well with both also and the paint fill looked good."

-John Lawler

Quality Rubber Stamp, Inc.

"We are quite impressed with the durability of luminosity of LaserGlow. What we are most happy with in terms of use and application is being able to have this as a choice for ADA applique material. It is a good choice to have."

-Dave Worden

Superior Engraving

"I use FlexiBrass as much as possible on my Universal laser and it has saved me hours of extra work versus my rotary engraving process. Thank you for providing consistent quality products."

-Ken Braswell

Braswell Trophy and Engraving

"As soon as I got the LaserGlow plastic I held it up to the light and took it into the ladies room to see the glow. Wow - really cool. My first thought for us is the elder-care homes; we do signs for where lights are not on 24/7."

-Margi Brownfield Swett

Vermont Trophy & Engraving, Inc.

"I was particularly excited to see the sample of your new LaserGlow product. I have done several jobs already having to use IPI's product. I can't wait to sell yours. This is something that will transpire gradually over the next several years in the New York / New Jersey area as people begin to bring present facilities into compliance."

-Tom Rutkowski

Rutko Engraving Systems

"I have been using the FlexiBrass and FlexiColor for a long time. It lasers very well at low power/high speed and cuts on the laser cleanly and effortlessly."

-Lyn Englert

Creative Graphics & Engraving

"Flexibrass is one of the friendliest laser engraving materials we use. You can run high speeds without affecting the engraving quality. You can vector cut in one pass. It does not get as "gummy" as other vector cut laser products. The ability to purchase with adhesive already installed is a plus. Great product for trophies and inexpensive awards. You can cut out the letters and apply to different substrates with ease."

-Chris Vedrines

CRS, Advanced Graphic Engraving

"Textures sheared and cut on the table saw fine. Engraves with ease. We use this material for control panel plates. I like the durability and scratch resistant surface."

-Scott Bigelow

Signs of our Times

"The ColorCast Acrylics line is great. We've used it for a couple of small ADA projects and some dimensional signage projects. One highlight to note is that we incorporated the Matte/Clear into building a 24" x 30" dimensional version of a logo for a local university. In that instance, it was used as the centerpiece and we back-painted the graphic. It lasers and routes very well and is easier to work with than standard cast acrylic from Acrylite. It seems to be more resistant to cracking and chipping as well."

-Brad Harmon

Syntech of Burlington

"We made two signs - a reverse engraved EXIT paint filled with black. We found that the material was very easy to engrave. We also tested the glow factor and found that the material is really bright and keeps its photoluminescent properties for a long period of time. We used black ADA Alternative with the LaserGlow applique. The sign looks great - because of the contrast the depth of the letters seemed to increase which we though was neat."

-Dawn Kacpura-Gutierrez

Century Sign Builders