Click to return to Home Page


PaintPlus >>
PaintPlus Primary Paint & Kit
PaintPlus Safety Paint & Kit


PaintPlus Safety Paints


Answering the needs of today's sign-maker, Rowmark now offers custom color blended paints in the PaintPlus Safety Paint line.

PaintPlus paints are specially formulated for color filling Rowmark's sub-surface engravable products. The Safety Paints were formulated for applications where recognized safety colors in signage are needed.

The smooth, rich color provides excellent coverage and is self-sealing. PaintPlus paints are available in kits of six, 2 oz (59,15 ml) or 8 oz (236,6 ml) jars, and can also be purchased individually. Kits include foam brush applicators.


safety products

Download PaintPlus Safety Paint Instructional Booklet

   kit legend        safety paint photo

Please carefully read these instructions and warnings before using PaintPlus paints

Where to Use
Properly prepared acrylic surface.

Drying Time
Dry to the touch in 30-45 minutes. Paint only when air temperatures are 50-90°F (10-32°C).

Surface Preparation
Thoroughly clean the surface and allow to dry.

Stir/Shake paint throughly to ensure uniform color. Finish with long, even strokes in one direction. Clean brush and hands with warm, soapy water.

Color filling requires a little bit of technique and preparation for optimal results. We recommend the following steps to prep the piece before painting or color filling. First, mask the edges of the plate to avoid over-painting. Use a soft cloth, paper towel, or other non-abrasive material underneath your plate.

For Best Results
Generally two coats of PaintPlus paints are required to get the best coverage and block any small holes that form in the paint from air pockets. Make one application from top to bottom and the second coat from bottom to top to get coverage on all of the character edges.

Rowmark does recommend that you completely cover the back of the finished sign or badge with paint to avoid any shadows when viewed from the front. This is not necessary if the substrate will be mounted on another surface or a backer plate is used.

For exterior applications, Rowmark recommends adhering a backer plate to the painted surface to minimize exposure to moisture.

Storage & Disposal
Do not freeze. Keep container closed when not in use. In case of spillage, absorb with inert materiel such as sand or kitty litter. Dispose of contaminated absorbent,
container and/or unused contents in accordance with local, state and federal regulations.